Wireshark · Wireshark-users: Re: [Wireshark-users] How to find TCP slowstart phase begins

[Jeff Morriss <jeff.morriss.ws@xxxxxxxxx>]

No, the metric is only used in choosing routes (the metric reflects the cost of the route).

As Jaap says the variation you're seeing is more likely just variation in system load and other (non-networking) factors.  Getting reproducible test results can be a challenge - you really need to control what's going on on the system at all times (for example I've seen overnight performance stress tests fail when the system went to check for OS updates at 2am: the extra CPU going to this other task was enough to push the system over the edge into failure).

On Thu, Feb 16, 2017 at 7:00 PM, <gedropi@xxxxxxxxxxx> wrote:

My loopback has a different metric '50'  than other interfaces which have a '1'.  Could this have something to do with the dfference?

On Sun, Feb 12, 2017, at 11:21 AM, samira afzal wrote:

Thanks a lot for your useful information Jaap. 

I was thinking because the simulation is loopback it has to have always the same output.But today i took the result and i saw that i have different throughput and rtt. What could have effect on localhost and loopback ? My computer connection to the internet is eth0 ( and my computer has not wifi connection) . and i captured information on   "loopback:lo" interface. Thanks a lot for your time

On Sun, Feb 12, 2017 at 8:25 AM, Jaap Keuter <jaap.keuter@xxxxxxxxx> wrote:

Hi,

If you would zoom in right at the origin, you’ll likely to see the slow start. but it will rapidly transition to congestion avoidance.

Thanks,

Jaap

On 12 Feb 2017, at 07:39, samira afzal <afzal.samira@xxxxxxxxx> wrote:

Hi all,

I got sequence numbers vs. time . Data transmission is over TCP and localhost from client to server. As the transmission is on TCP, I had the expectation that TCP starts to send 2 packets first and then 4 , 8, 16 and etc. Something similar to http://packetlife.net/blog/2011/jul/5/tcp-slow-start/. but my Graph is different. and i can't understand why? Is it possible to understand when TCP slowstart phase begins and ends?

Thank you for your time and help.

___________________________________________________________________________

___________________________________________________________________________

Sent via:    Wireshark-users mailing list <wireshark-users@xxxxxxxxxxxxx>

Archives:    https://www.wireshark.org/lists/wireshark-users

Unsubscribe: https://www.wireshark.org/mailman/options/wireshark-users

             mailto:wireshark-users-request@xxxxxxxxxxxxx?subject=unsubscribe

___________________________________________________________________________

Sent via:    Wireshark-users mailing list <wireshark-users@xxxxxxxxxxxxx>

Archives:    https://www.wireshark.org/lists/wireshark-users

Unsubscribe: https://www.wireshark.org/mailman/options/wireshark-users

            mailto:wireshark-users-request@xxxxxxxxxxxxx?subject=unsubscribe

___________________________________________________________________________
Sent via:    Wireshark-users mailing list <wireshark-users@xxxxxxxxxxxxx>
Archives:    https://www.wireshark.org/lists/wireshark-users
Unsubscribe: https://www.wireshark.org/mailman/options/wireshark-users
             mailto:wireshark-users-request@xxxxxxxxxxxxx?subject=unsubscribe