Hi Wireshark
Issue background: We found the delta duration for both version is having huge difference as the diagram shown below.
Through the finding from my side
The different of the version shown the different result
Version1.8.1
Version 2.2.4
Here is the analyze from (version 2.2.4)
1.It show 65.2 upload packet loss and 23.6%packet loss.
Example when we observe the delta ms during this time which is sequence 32562 to 32563. The different between the duration is only 121ms. But here written 59719 delta ms.
Thus I suspect the 2.2.4 version of the wireshark have some error while analyze the RTP packet
2. Same log has been analyze from above but the wireshark version is(version 1.8.1). The result shown 0% packet loss for both download and upload
Apparently
we could observe that the duration for the sequence 32564 shall be 19ms. Thus We can calculate the duration difference between 32563 and 32564
778ms-657ms= 121ms. Thus the info is consistent compare with the wireshark download from the official website
Conclusion:
There is a huge difference between the tools being used. I suspect the tools for version 2.2.4 has some error when analyzing the delta duration for every RTP packets. I need wireshark’s team advice
to confirm us which version is showing correct result. Perhaps there is other way to verify every RTP packets delta duration on version 2.2.4
I hope to get your feedback in soon.
Attached here is the log I have been analyze.
Thanks
Best Regards
Leong Kah Jun, Admission test Huawei Device