SMITH, RICHARD S (RICH), ATTLABS wrote:
> Vendor MIB file comes to me with .mi2 extension. I can't get the MIB to
> load into wireshark. I've tried various with the filename and
> extension with no luck.
It won't work if you don't have all the prerequisite MIBs, and they need
to be syntactically correct:
Juniper-AAA-MIB
+--SNMPv2-SMI [7 identifiers]
+--SNMPv2-TC [4 identifiers]
| +--SNMPv2-SMI [1 identifier]
+--SNMPv2-CONF [2 identifiers]
| +--SNMPv2-SMI [3 identifiers]
+--Juniper-MIBs [1 identifier]
| +--SNMPv2-SMI [1 identifier]
| +--Juniper-UNI-SMI [1 identifier]
| +--SNMPv2-SMI [3 identifiers]
+--Juniper-TC [5 identifiers]
| +--SNMPv2-SMI [4 identifiers]
| +--SNMPv2-TC [1 identifier]
| | +--SNMPv2-SMI [1 identifier]
| +--Juniper-MIBs [1 identifier]
| +--SNMPv2-SMI [1 identifier]
| +--Juniper-UNI-SMI [1 identifier]
| +--SNMPv2-SMI [3 identifiers]
+--Juniper-ROUTER-MIB [1 identifier]
| +--SNMPv2-SMI [4 identifiers]
| +--SNMPv2-TC [4 identifiers]
| | +--SNMPv2-SMI [1 identifier]
| +--SNMPv2-CONF [2 identifiers]
| | +--SNMPv2-SMI [3 identifiers]
| +--SNMP-FRAMEWORK-MIB [1 identifier]
| | +--SNMPv2-SMI [4 identifiers]
| | +--SNMPv2-TC [1 identifier]
| | | +--SNMPv2-SMI [1 identifier]
| | +--SNMPv2-CONF [2 identifiers]
| | +--SNMPv2-SMI [3 identifiers]
| +--Juniper-TC [1 identifier]
| | +--SNMPv2-SMI [4 identifiers]
| | +--SNMPv2-TC [1 identifier]
| | | +--SNMPv2-SMI [1 identifier]
| | +--Juniper-MIBs [1 identifier]
| | +--SNMPv2-SMI [1 identifier]
| | +--Juniper-UNI-SMI [1 identifier]
| | +--SNMPv2-SMI [3 identifiers]
| +-- [2 identifiers]
| +--Juniper-MIBs [1 identifier]
| +--SNMPv2-SMI [1 identifier]
| +--Juniper-UNI-SMI [1 identifier]
| +--SNMPv2-SMI [3 identifiers]
+--IPV6-TC [3 identifiers]
+--SNMPv2-SMI [1 identifier]
+--SNMPv2-TC [1 identifier]
+--SNMPv2-SMI [1 identifier]
--
There's no point in being grown up if you can't be childish sometimes.
-- Dr. Who
