Wireshark-users: Re: [Wireshark-users] Can't load a MIB file
Date Index · Thread Index · Other Months · All Mailing Lists
Date Prev · Date Next · Thread Prev · Thread Next
From: "SMITH, RICHARD S (RICH), ATTLABS" <rsmith62@xxxxxxx>
Date: Fri, 1 Aug 2008 09:14:44 -0400
Looks like it partially was.  Now instead of nothing happening on restart and the MIB not being in the module list I get errors for the files.  I get 'module not readable' if I use the file name.  Looking at other files though I don't see a difference in the format that should be causing a problem.
 
Rich
 
From: j.snelders@xxxxxxxxxx
Date: Fri, 1 Aug 2008 06:43:26 +0200

Is this a mather of using the OK_button in stead of the Apply_button?

Take a look at message "Add/delete SMI paths or modules" dd 20-07-2008.

Thanx 
Joan


>-- Oorspronkelijk bericht --
>Date: Thu, 31 Jul 2008 16:01:03 -0400
>From: "SMITH, RICHARD S (RICH), ATTLABS" <rsmith62@xxxxxxx>
>To: <wireshark-users@xxxxxxxxxxxxx>
>Subject: [Wireshark-users] Can't load a MIB file
>Reply-To: Community support list for Wireshark <wireshark-users@xxxxxxxxxxxxx>
>
>
>Vendor MIB file comes to me with .mi2 extension.  I can't get the MIB to
>load into wireshark.   I've tried various with the filename and
>extension with no luck.
> 
>File name juniAaa.mi2
> 
>Any ideas what I need to modify to get it to load?