Ethereal-users: Re: [Ethereal-users] SEQ/ACK analysis, The RTT to ACK the segment was 'very larg

Note: This archive is from the project's previous web site, ethereal.com. This list is no longer active.

Date Index Thread Index Other Months All Mailing Lists
Date Prev Date Next Thread Prev Thread Next
From: ronnie sahlberg <ronniesahlberg@xxxxxxxxx>
Date: Mon, 11 Oct 2004 18:23:22 +1000
i have checked in a patch for this problem.



On Sat, 9 Oct 2004 18:16:04 +1000, Ciaran Finnegan  wrote:
> 
> 
> 
> Hi,
> 
>  
> 
> I've got three traces of a telnet session (either side of a wireless bridge
> link and on the other side of a NAT router). 
> 
>  
> 
> When I run a filter tcp.analysis.ack_rtt>1 on each of the traces I see
> telnet data packets in both directions (some marked as [TCP out-of-order])
> where the SEQ/ACK Analysis reports the RTT to ACK the segment was a number
> that is consistently 10971xxxxx.xx seconds. The traces were run over a
> period of four hours.
> 
>  
> 
> If I were more knowledgeable would this be making me emit satisfied little
> 'ahaa' noises?
> 
>  
> 
> Ta,
> 
>  
> 
> Ciaran. 
> _______________________________________________
> Ethereal-users mailing list
> Ethereal-users@xxxxxxxxxxxx
> http://www.ethereal.com/mailman/listinfo/ethereal-users
> 
> 
>