Wireshark · Wireshark-users: Re: [Wireshark-users] How to save the content of an RTP stream in WS 2.4.4?

[Joe Tozer <epjtozer@xxxxxxxxx>]

thanks, I had tried that but got an error message and zero length file.

Having looked again, it saves as default a file type "Sun RTP audio"; seems the trick is to go to the "save as file type" drop down, select ".raw" but give the file a ".ts"  extension when saving, and then all's good . . . .

all fixed now, many thanks for the help.

On 27 January 2018 at 19:02, Jaap Keuter <jaap.keuter@xxxxxxxxx> wrote:

Hi,

What if you choose Unsynchronised Forward Stream Audio and select the raw output format in the file save dialog?

On 26 Jan 2018, at 16:59, Joe Tozer <epjtozer@xxxxxxxxx> wrote:

thanks for the reply, the save button is there but the only options I get in the save drop down are:

Unsynchronised Forward Stream Audio
File synchronised Forward Stream Audio
Forward Stream CSV
Save Graph

none of these saves the raw RTP MP2T stream content

On 26 January 2018 at 15:29, Jaap Keuter <jaap.keuter@xxxxxxxxx> wrote:

Hi,

You’ll find the save option at the lower right hand side of the RTP stream analysis window.
Click on it and choose how to save the stream, then in the file dialog choose the format and name.

Good luck,
Jaap

> On 26 Jan 2018, at 15:14, joe tozer <wireshark.20090520@xxxxxxxxx.uk> wrote:
>
>
> I've just moved from WS 1.10 to WS 2.4.4; in WS 1.10 I used to be able to save the (MP2T) content of an RTP stream by highlighting a packet from the desired stream in the main WS window
> then selecting the “Telephony” menu
> hovering on "RTP"
> selecting "stream analysis"
> selecting "forward" on the “Channels” radio button
> Clicking "save payload" (with a .ts extension for an MP2T transport stream)
>
> Anyone advise how to do this in WS2.4.4, where I can't find a "save payload" option.
>
>
> MTIA
>

___________________________________________________________________________
Sent via:    Wireshark-users mailing list <wireshark-users@xxxxxxxxxxxxx>
Archives:    https://www.wireshark.org/lists/wireshark-users
Unsubscribe: https://www.wireshark.org/mailman/options/wireshark-users
             mailto:wireshark-users-request@xxxxxxxxxxxxx?subject=unsubscribe