Wireshark · Wireshark-users: Re: [Wireshark-users] Use Wireshark to snif other computers on the same wifi network

[pmeissner@xxxxxxxx]

Now you will need to filter out the wifi management protocols in Wireshark, or you could do a filter on just TCP or UDP etc in Wire shark

P
Sent wirelessly from my BlackBerry device on the Bell network.
Envoyé sans fil par mon terminal mobile BlackBerry sur le réseau de Bell.

-----Original Message-----
From: Aaron Schneider <notstop@xxxxxxxx>
Sender: wireshark-users-bounces@xxxxxxxxxxxxx
Date: Tue, 12 Aug 2014 22:47:22 
To: Community support list for Wireshark<wireshark-users@xxxxxxxxxxxxx>
Reply-To: Community support list for Wireshark <wireshark-users@xxxxxxxxxxxxx>
Subject: Re: [Wireshark-users] Use Wireshark to snif other computers on the
 same wifi network

Hi:

Indeed I'm able to get monitor mode on the interface mon0, but now the protocol for all packets is 802.11. What's next?

> Hi;
> 
> To verify if your network card can support monitor mode, you can do the
> following in KALI;
> 
> #airmon-ng start wlan0 (or what ever you adapter is wlan1 etc)
> 
> This should put your card in monitor mode if it supports it.  Then do;
> 
> #airmon-ng
> 
> you should see wlan0 and mon0 as a listing of adapters.
> 
> If you see mon0 then you know that the card is capable of monitor modem
> and use the mon0 adapter in Wireshark.
> 
> Hope that helps.
> 
> P

 		 	   		  
___________________________________________________________________________
Sent via:    Wireshark-users mailing list <wireshark-users@xxxxxxxxxxxxx>
Archives:    http://www.wireshark.org/lists/wireshark-users
Unsubscribe: https://wireshark.org/mailman/options/wireshark-users
             mailto:wireshark-users-request@xxxxxxxxxxxxx?subject=unsubscribe