Wireshark-users: Re: [Wireshark-users] How to convert the FR WAN Header to Ethernet ?
Date Index · Thread Index · Other Months · All Mailing Lists
Date Prev · Date Next · Thread Prev · Thread Next
From: Martin Visser <martinvisser99@xxxxxxxxx>
Date: Fri, 2 Oct 2009 07:48:51 +1000
The tool is called a router, they "convert" frame relay frames to Ethernet all the time ;-)

Regards, Martin

MartinVisser99@xxxxxxxxx


On Wed, Sep 30, 2009 at 12:49 PM, Guy Harris <guy@xxxxxxxxxxxx> wrote:

On Sep 29, 2009, at 7:34 PM, Yves Choi wrote:
> I have a trace file captured on Fream Realy link.
>
> I'd like to remove the Frame Realy Header and replace to the
> Ethernet Header.
>
> Is there any tool or way to do this ?

There are Frame Relay packets that do not correspond to any type of
Ethernet packet, so that is not possible in the general case.

In the particular case of IP packets, I don't know of any tool that
will strip off the Frame Relay header and replace it with a fake
Ethernet header (with fake source and destination addresses and the
appropriate Ethernet type).

Why do you want to do this?
___________________________________________________________________________
Sent via:    Wireshark-users mailing list <wireshark-users@xxxxxxxxxxxxx>
Archives:    http://www.wireshark.org/lists/wireshark-users
Unsubscribe: https://wireshark.org/mailman/options/wireshark-users
            mailto:wireshark-users-request@xxxxxxxxxxxxx?subject=unsubscribe