Wireshark-users: Re: [Wireshark-users] iSCSI display filter
Date Index · Thread Index · Other Months · All Mailing Lists
Date Prev · Date Next · Thread Prev · Thread Next
From: Abhijit Bare <abhibare@xxxxxxxxx>
Date: Tue, 1 Sep 2009 15:38:26 -0600
Does this help? -> http://wiki.wireshark.org/iSCSI

May be also try the Capture filter. Wireshark might be looking for default port.

Also I found this sample iSCSI capture file in Wireshark sample captures. When I typed "iscsi" in display bar, it showed iSCSI packets. You can probably try comparing with it.

http://wiki.wireshark.org/SampleCaptures?action="">

- Abhijit

On Tue, Sep 1, 2009 at 1:31 PM, Yongjian Zhang <brianzhang2007@xxxxxxxxx> wrote:
Hi,

I'm a rookie to Wireshark. I was trying to use it to analyze the iSCSI
traffic in a trace file. The problem I came up with is that when I put
"iscsi" in the filter bar, Wireshark always gave me nothing...

But I did see the iSCSI traffic in the frames...

Did I do it wrong...?

Any help would be highly appreciated!

Thanks,
Jack

___________________________________________________________________________
Sent via:    Wireshark-users mailing list <wireshark-users@xxxxxxxxxxxxx>
Archives:    http://www.wireshark.org/lists/wireshark-users
Unsubscribe: https://wireshark.org/mailman/options/wireshark-users
            mailto:wireshark-users-request@xxxxxxxxxxxxx?subject=unsubscribe