Wireshark-users: Re: [Wireshark-users] Why i am getting BER Error: Missing field inSETclass:CONTE
Date Index · Thread Index · Other Months · All Mailing Lists
Date Prev · Date Next · Thread Prev · Thread Next
From: "Anders Broman" <a.broman@xxxxxxxxx>
Date: Mon, 23 Mar 2009 18:34:21 +0100

Hi,

I Committed a fix in revision 27831, could you check it please?

Regards

Anders

 

Från: wireshark-users-bounces@xxxxxxxxxxxxx [mailto:wireshark-users-bounces@xxxxxxxxxxxxx] För Michael Lum
Skickat: den 23 mars 2009 17:21
Till: Community support list for Wireshark
Ämne: Re: [Wireshark-users] Why i am getting BER Error: Missing field inSETclass:CONTEXT(2) tag: expected?

 

I looked at some of the 1.1.3 source and it appears that both of those messages are incorrect.

 

The AuthDir invoke is missing optional tags for a couple of parameters.

The FeatReq invoke looks like a copy/paste error from a FacDir2 or some other handoff related message.

 

I have modified and built a new version of 1.1.3 and the messages look okay.

 

I can submit a patch but I'm not sure which version the fix would appear in.

 

--
Michael Lum                   Principal Software Engineer
4600 Jacombs Road             +1.604.276.0055
Richmond, B.C.
Canada V6V 3B1
Star Solutions

 

 

From: wireshark-users-bounces@xxxxxxxxxxxxx [mailto:wireshark-users-bounces@xxxxxxxxxxxxx] On Behalf Of Sanjay Nayak
Sent: March 23, 2009 12:56 AM
To: wireshark-users@xxxxxxxxxxxxx
Subject: [Wireshark-users] Why i am getting BER Error: Missing field in SETclass:CONTEXT(2) tag: expected?

Hello

I want to decode the ANSI MAP Authentication Directive Invoke message in wireshark-1.0.6.

But the wireshark shows two missing parameters errors. They are as follows


1.BER Error: Missing field in SET class:CONTEXT(2) tag:77 expected
2.BER Error: Missing field in SET class:CONTEXT(2) tag:182 expected

But according to the section 2.2 of the spec.

http://www.3gpp2.org/Public_html/specs/X.S0004-540-E_v2.0_070723.pdf

here there are two mandatory parameters for the message AUTHDIR.

1. Electronic serial number
2. MSID(i.e MIN/IMSI)

That i have already given in my message.

Then why wireshark shows tag:77 and tag:182 errors?

That means it  considers two extra parameters as mandatory. Plz suggest what is the problem with it?

For parameters the spec is

http://www.3gpp2.org/Public_html/specs/X.S0004-550-E_v2.0_070723.pdf


Similarly when i want to decode ANSI MAP Feature Request Invoke message, it shows 5 missing parameters errors. They are as

follows

BER Error: Missing field in SET class:CONTEXT(2) tag:1 expected
BER Error: Missing field in SET class:CONTEXT(2) tag:6 expected
BER Error: Missing field in SET class:CONTEXT(2) tag:7 expected
BER Error: Missing field in SET class:CONTEXT(2) tag:2 expected
BER Error: Missing field in SET class:CONTEXT(2) tag:134 expected

But according to the section 2.20 of the spec.

http://www.3gpp2.org/Public_html/specs/X.S0004-540-E_v2.0_070723.pdf

here there are 3 mandatory parameters for the message FeatureRequest.

1.Digits(Dialed)
2.Electronic serial number
3. MSID(i.e MIN/IMSI)

That i have already given in my message.

Then why wireshark shows  the above tag errors? Plz suggest.

I have attached the traces for the above two messages.

Plz suggest what is the problem with the above two messages in wireshark-1.0.6.

Regd's
Sanjay