our MATE can do that...
On Thu, Mar 13, 2008 at 7:12 PM, Martin Mathieson
<martin.r.mathieson@xxxxxxxxxxxxxx> wrote:
> I once saw an impressive demo of the Hammer Call Analyzer.
>
> It let you configure rules to describe how the gateway would be translating
> between numbers and URIs.
> It could then associate both call legs of the call and show them in a single
> ladder diagram.
>
> Martin
>
>
>
> On Thu, Mar 13, 2008 at 5:35 PM, Jaap Keuter <jaap.keuter@xxxxxxxxx> wrote:
> > Hi,
> >
> > Called party number usually translates into the INVITE URI. The number
> plan
> > and type are not converted, maybe only used to verify that a URI can be
> > composed of the called party number information, or, if it's an advanced
> > gateway, could select the URI format based on the plan and type, but I've
> > never seen that.
> >
> > Thanx,
> > Jaap
> >
> >
> >
> >
> > mixalis x. wrote:
> > > Hello all,
> > >
> > > I have an H323->SIP gateway and i'm trying to figure out how it maps the
> > > "Called Party/Number plan/Number type" information element, found in the
> > > original Q.931 setup message, to the SIP Invite message. I have the
> > > traces from both the Q931 setup packet (where i can see the number
> > > plan/number type) and the SIP Invite packet, but i cannot locate this
> > > specific information inside the SIP message.
> > >
> > > Any ideas?
> > >
> > > tia
> > > Michalis
> > >
> >
> > _______________________________________________
> > Wireshark-users mailing list
> > Wireshark-users@xxxxxxxxxxxxx
> > http://www.wireshark.org/mailman/listinfo/wireshark-users
> >
>
>
> _______________________________________________
> Wireshark-users mailing list
> Wireshark-users@xxxxxxxxxxxxx
> http://www.wireshark.org/mailman/listinfo/wireshark-users
>
>
--
This information is top security. When you have read it, destroy yourself.
-- Marshall McLuhan
