Hi Sangeetha,
If the packets you are interested in, are passing by your machine, capture in promiscuous mode and use a capture filter (host x.x.x.x) or display filter (ip.addr eq x.x.x.x).
If you cannot see those packets from your machine, your machine is probably connected to a switched Ethernet network. For more information, please read the section on capturing packets at http://www.wireshark.org/faq.html#q7.1
Best regards,
Tom Heyligen
Quality Software Engineer
________________________________________
From: wireshark-users-bounces@xxxxxxxxxxxxx [mailto:wireshark-users-bounces@xxxxxxxxxxxxx] On Behalf Of Sangeetha B
Sent: dinsdag 4 december 2007 9:45
To: wireshark-users@xxxxxxxxxxxxx
Subject: [Wireshark-users] Capturing packets for given ip address
Hi,
I am working with wireshark. By default it was finding my machine IP Address and capturing the packets flowing into and from my machine.
My Requirement was to give some IP Address in my network. It has to capture the packets flowing through that IP Address.
Please help me outtttttt.
Regards,
Sangeetha
DISCLAIMER ========== This e-mail may contain privileged and confidential information which is the property of Persistent Systems Ltd. It is intended only for the use of the individual or entity to which it is addressed. If you are not the intended recipient, you are not authorized to read, retain, copy, print, distribute or use this message. If you have received this communication in error, please notify the sender and delete all copies of this message. Persistent Systems Ltd. does not accept any liability for virus infected mails.
