Wireshark · Wireshark-users: Re: [Wireshark-users] Capture filter not working?

["Trevor Tolk" <TTolk@xxxxxxxxxxxx>]

capture filter: 

host 65.98.143.227

-----Original Message-----
From: wireshark-users-bounces@xxxxxxxxxxxxx
[mailto:wireshark-users-bounces@xxxxxxxxxxxxx] On Behalf Of Stephen
Fisher
Sent: 2007-11-15 16:42
To: Community support list for Wireshark
Subject: Re: [Wireshark-users] Capture filter not working?

On Thu, Nov 15, 2007 at 03:26:06PM -0800, Trevor Tolk wrote:

> When I use an IP (host) or tcp/udp capture filter on the monitoring 
> nic, it captures no traffic.  When I use the same filter on the nic 
> connected to the normal network, the filter works fine.  I can use an 
> ether capture filter an it works.

What is (are) the capture filter(s) you are trying to use?  It should be
working fine without changing any options.


Steve
_______________________________________________
Wireshark-users mailing list
Wireshark-users@xxxxxxxxxxxxx
http://www.wireshark.org/mailman/listinfo/wireshark-users