Ok this is strange. Just to make sure I rechecked "Enable concurrent DNS
name resolution" and it loaded just as quickly. I also enabled name
resolution as well and it still loaded just as quickly.
The only thing I can think of is that I rebooted inbetween the last time I
loaded the capture file and loading it this time around.
Odd.
John
-----Original Message-----
From: wireshark-users-bounces@xxxxxxxxxxxxx
[mailto:wireshark-users-bounces@xxxxxxxxxxxxx] On Behalf Of John Hinckley
Sent: Wednesday, September 26, 2007 9:59 AM
To: 'Community support list for Wireshark'
Subject: Re: [Wireshark-users] slow loading cap file
I actually had "Enable network name resolution" disabled but I had "Enable
concurrent DNS name resolution" checked; disabling this made the file load
in about 2 seconds.
TY for the point in the right direction!
John
-----Original Message-----
From: wireshark-users-bounces@xxxxxxxxxxxxx
[mailto:wireshark-users-bounces@xxxxxxxxxxxxx] On Behalf Of Jeff Morriss
Sent: Wednesday, September 26, 2007 8:28 AM
To: Community support list for Wireshark
Subject: Re: [Wireshark-users] slow loading cap file
John Hinckley wrote:
> I have a relatively small capture file (2.2mb) and it takes approximately
5
> minutes to load this capture file. Is this normal? I'm using the latest
> version of wireshark for winxp and I have 1GB mem on a P4 system.
Do you have name resolution (DNS resolution) turned on? Try turning it off:
Edit->Preferences->Name Resolution
and uncheck the "Enable network name resolution" box.
_______________________________________________
Wireshark-users mailing list
Wireshark-users@xxxxxxxxxxxxx
http://www.wireshark.org/mailman/listinfo/wireshark-users
_______________________________________________
Wireshark-users mailing list
Wireshark-users@xxxxxxxxxxxxx
http://www.wireshark.org/mailman/listinfo/wireshark-users
