Wireshark-users: Re: [Wireshark-users] Define Specific UDP range to be RTP
Date Index · Thread Index · Other Months · All Mailing Lists
Date Prev · Date Next · Thread Prev · Thread Next
From: "Luis EG Ontanon" <luis.ontanon@xxxxxxxxx>
Date: Wed, 22 Aug 2007 08:57:51 +0200
If you enable heuristic recognition from the RTP preferences ("Try to
decode RTP outside conversations"), Wireshark will try to guess if
undecoded UDP packets are RTP and if it recognizes them as such will
decode them as RTP.


On 8/22/07, J P <jrp999@xxxxxxxxx> wrote:
> Hi,
>
> In my setup all UDP packets with port numbers between 15000 and 20000 are
> RTP.
>
> How can I set up Wireshark to ALWAYS decode UDP Packets with port numbers
> between 15000 and 20000 as RTP?
>
> Thanx,
>
> John
> _______________________________________________
> Wireshark-users mailing list
> Wireshark-users@xxxxxxxxxxxxx
> http://www.wireshark.org/mailman/listinfo/wireshark-users
>
>


-- 
This information is top security. When you have read it, destroy yourself.
-- Marshall McLuhan