I am just wondering why I would start seeing the preamble in
some of the decodes of packets, yet not in all of them? At first I thought
maybe I was transmitting two preambles, but as far as I can tell I am not. I
thought that the hardware would take care of the preamble and this wouldn’t
be seen in wireshark at all (as the preamble is not seen in other decodes).
Any help or ideas on why this could possibly be happening would be very helpful
(and might even let me stop banging my head against the wall).
Thanks
Pete
E-mail confidentiality.
--------------------------------
This e-mail contains confidential and / or privileged information belonging to Spirent Communications plc, its affiliates and / or subsidiaries. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution and / or the taking of any action based upon reliance on the contents of this transmission is strictly forbidden. If you have received this message in error please notify the sender by return e-mail and delete it from your system. If you require assistance, please contact our IT department at helpdesk@xxxxxxxxxxx.
Spirent Communications plc,
Spirent House, Crawley Business Quarter, Fleming Way, Crawley, West Sussex, RH10 9QL, United Kingdom.
Tel No. +44 (0) 1293 767676
Fax No. +44 (0) 1293 767677
Registered in England Number 470893
Registered at Spirent House, Crawley Business Quarter, Fleming Way, Crawley, West Sussex, RH10 9QL, United Kingdom
Or if within the US,
Spirent Communications,
26750 Agoura Road, Calabasas, CA, 91302, USA.
Tel No. 1-818-676- 2300
|
