Wireshark-users: Re: [Wireshark-users] Ping Replys without Request
From: "STEINECKE Michael SD-G (AREVA NP GmbH)" <Michael.Steinecke@xxxxxxxxx>
Date: Wed, 30 Aug 2006 15:35:59 +0200
Hello Petr,

they belong to the devices.
I've uploaded a sample for the scenario, you'll find it here:
http://rapidshare.de/files/31314716/echo_reply_sample.pcap

Michael Steinecke
 

> -----Ursprüngliche Nachricht-----
> Von: wireshark-users-bounces@xxxxxxxxxxxxx 
> [mailto:wireshark-users-bounces@xxxxxxxxxxxxx] Im Auftrag von 
> Petr Vácha
> Gesendet: Mittwoch, 30. August 2006 15:00
> An: Community support list for Wireshark
> Betreff: Re: [Wireshark-users] Ping Replys without Request
> 
> No, I mean MAC addresses that are present in the ICMP 
> replies.... if they really belong to devices involved or are 
> different.
> 
> Petr 
> 
> > -----Original Message-----
> > From: wireshark-users-bounces@xxxxxxxxxxxxx
> > [mailto:wireshark-users-bounces@xxxxxxxxxxxxx] On Behalf Of 
> STEINECKE 
> > Michael SD-G (AREVA NP GmbH)
> > Sent: Wednesday, August 30, 2006 2:57 PM
> > To: Community support list for Wireshark
> > Subject: Re: [Wireshark-users] Ping Replys without Request
> > 
> > Hello Petr,
> > 
> > you mean if displayed the MAC-adress resolution instead of the 
> > MAC-adress?
> > Then thea answer is yes. But this is only a setting in wireshark i 
> > think.
> > 
> > Michael Steinecke
> > 
> > > -----Ursprüngliche Nachricht-----
> > > Von: wireshark-users-bounces@xxxxxxxxxxxxx
> > > [mailto:wireshark-users-bounces@xxxxxxxxxxxxx] Im Auftrag 
> von Petr 
> > > Vácha
> > > Gesendet: Dienstag, 29. August 2006 10:51
> > > An: Community support list for Wireshark
> > > Betreff: Re: [Wireshark-users] Ping Replys without Request
> > > 
> > > Hello,
> > > we have come up with the similar problem once, but I need you to 
> > > answer the following question to see if it's really the same 
> > > situation:
> > > 
> > > Are MAC address in the ICMP packet really present in your 
> network or 
> > > are they something like DigitalEquipment_00-02-01 (one 
> such is the 
> > > source and one is the destination)?
> > > 
> > > Petr Vacha
> > > 
> > > > -----Original Message-----
> > > > From: wireshark-users-bounces@xxxxxxxxxxxxx
> > > > [mailto:wireshark-users-bounces@xxxxxxxxxxxxx] On Behalf Of
> > > Jim Young
> > > > Sent: Monday, August 28, 2006 5:25 PM
> > > > To: wireshark-users@xxxxxxxxxxxxx
> > > > Subject: Re: [Wireshark-users] Ping Replys without Request
> > > > 
> > > > Hello Michael,
> > > > 
> > > > >>> "STEINECKE Michael SD-G (AREVA NP GmbH)"
> > > > <Michael.Steinecke@xxxxxxxxx> 08/28/06 4:33 AM >>>
> > > > > Hello folks,
> > > > > 
> > > > > i've a bit strange issue in the communication between a
> > Server and
> > > > his
> > > > > client (a microcontroler).
> > > > > The controler send "Echo Reply" packets without a 
> corresponding
> > > > ICMP
> > > > > requests. Is there another way how this can happen then
> > an program
> > > > or
> > > > > firmware error? Something like an TCP packet that
> > requests a ICMP
> > > > Echo
> > > > > par example?
> > > > > 
> > > > > Best Regards
> > > > > Michael Steinecke
> > > > 
> > > > Does you controller have multiple NIC interfaces?  If so, then 
> > > > depending on how you've set up your route statements on the
> > > controller
> > > > (assuming that you can) it's possible that replies received
> > > on one NIC
> > > > interface will be returned out a different
> > > > NIC interface.   IP addresses more than one hop away could 
> > > > be taking a "default" route (out the NIC interface towards your 
> > > > server).
> > > > 
> > > > Take a look at the destination IP address (where the ping
> > reply is
> > > > supposed to go to) and the destination MAC address for the
> > > ping reply.  
> > > > This should give you a clue on who/what might be generating the 
> > > > original request.
> > > > 
> > > > Then again if it's some type of specialized controller, then I 
> > > > wouldn't be surprised to see the vendor doing something
> > > non-conventual
> > > > like using ICMP echo replies to send signalling
> > > > information to some other station(s).   
> > > > 
> > > > I've also seen some devices that use an an undocumented
> > private NIC
> > > > setup internally.  I've had a few occasions where these 
> back-end 
> > > > packets have leaked out the one public NIC.
> > > > 
> > > > I hope this find this useful.
> > > > 
> > > > Jim Young
> > > > 
> > > > 
> > > > 
> > > > _______________________________________________
> > > > Wireshark-users mailing list
> > > > Wireshark-users@xxxxxxxxxxxxx
> > > > http://www.wireshark.org/mailman/listinfo/wireshark-users
> > > > 
> > > _______________________________________________
> > > Wireshark-users mailing list
> > > Wireshark-users@xxxxxxxxxxxxx
> > > http://www.wireshark.org/mailman/listinfo/wireshark-users
> > > 
> > _______________________________________________
> > Wireshark-users mailing list
> > Wireshark-users@xxxxxxxxxxxxx
> > http://www.wireshark.org/mailman/listinfo/wireshark-users
> > 
> _______________________________________________
> Wireshark-users mailing list
> Wireshark-users@xxxxxxxxxxxxx
> http://www.wireshark.org/mailman/listinfo/wireshark-users
>