The operating system to do the capturing is WinXP.
The idea is that the same machine that configure the rs485-based network
do the capture if it´s possible.
I'll ask about the hardware and software, now I have only a description of
protocol to do the dissector but I think the hardware to capture is a
serial transceiver
Thanks.
>
> On Sep 28, 2010, at 12:56 AM, Agustin Figueredo Canosa wrote:
>
>> I´m working with a link layer protocol using rs485 interface. I have
>> created a dissector for my protocol and it works fine. But now I would
>> like (if possible) to capture packets in real time.
>>
>> I think it´s not possible to capture live data from rs485 using
>> wireshark
>> directly but if anyone have worked in it I'll be grateful for any help.
>
> Ultimately, Wireshark's ability to capture from a traffic source is
> dependent on libpcap/WinPcap's ability to capture from it, which is
> dependent on the OS on which you're capturing and/or the hardware used for
> the capturing. Modern versions of libpcap (for UN*X systems) and WinPcap
> (for Windows) support adding modules to handle various types of capture
> hardware and software (although they're modules compiled into the libpcap
> or WinPcap library, not plug-in modules loaded at run time).
>
> On what operating system or operating systems do you want to do the
> capturing? What software does it have to support RS-485?
>
> What sort of hardware do you have to connect to the RS-485-based network?
> An RS-485-to-USB converter, as you mention, or some other form of hardware
> (such as a serial transceiver)?
>
> Do you want to capture traffic on an RS-485-based network that's neither
> sent to nor from the machine doing the capturing ("third-party" capture),
> or do you just want to capture traffic sent to or from your machine?
> ___________________________________________________________________________
> Sent via: Wireshark-dev mailing list <wireshark-dev@xxxxxxxxxxxxx>
> Archives: http://www.wireshark.org/lists/wireshark-dev
> Unsubscribe: https://wireshark.org/mailman/options/wireshark-dev
> mailto:wireshark-dev-request@xxxxxxxxxxxxx?subject=unsubscribe
>
