Wireshark · Wireshark-dev: Re: [Wireshark-dev] dissector plugin help

[Brian Oleksa <oleksab@xxxxxxxxxxxxxxxxxxxxxx>]

Philippe

I sent you an e-mail with some screen shots but it appears the screen 
shots were too big.
So here is my outcome...maybe you will get the screenshots later.

I still get the same results.
I changed in the code where the ports file lives at to (c:/ports.txt). 
My ports.txt file is at the root of C:.
I rebuilt the code.
Deployed the .dll's files to the plugin directory of several machines 
running different versions of wireshrak
and I still get:

**"Couldn't load module", The specified module could not be found.**

I build your code using VS 2005.

Any Thoughts...??

Are you able to run my plugin on any machine or just a development 
machine..?
The goal of this plugin is to have people download the helen.dll file 
place it in their plugin directory and have it work.

Having them download wireshark and build it to get my plugin to run is 
probably too much effort
I can get this to work on Linux with no problems. They download the 
helen.so file place it in the plugin directory and everything works fine.

Thanks again for all your help.

Brian



philippe alarcon wrote:
> Hello Brian,
>
> I have taken your code and created the plugin using my environment.
> I have no problem to load your plugin.
> Find here attached all the package.
> May be you could check if the created dll works with your Wireshark.
>
> Note that I have changed the directory used to get ports.txt in the 
> source.
>
> May be this can help you in solving your problem.
>
> If you send an example of capture, I can check if your dissector is 
> working correctly
> with your protocol.
>
> Regards
> Philippe
>
>
> Date: Fri, 27 Mar 2009 00:12:52 -0400
> From: oleksab@xxxxxxxxxxxxxxxxxxxxxx
> To: wireshark-dev@xxxxxxxxxxxxx
> Subject: Re: [Wireshark-dev] dissector plugin help
>
> Olivier (wsge)
>
> I really appreciate your quick response.
>
> I have added the following line to my Makefile.nmake
> mt.exe -manifest helen.dll.manifest - outputresource:helen.dll;2
>
> This does indeed create a helen.dll.manifest file. I take that along with the helen.dll
> file and copy it into my plugins directory on another (deployment) machine.
>
> I am still getting the error:
> *"Couldn't load module", The specified module could not be found.*
>
> Am I missing something here..?
>
> Attached is all my code and files in the helen.zip file.
> Also attached is my ports file that goes in the root of C:  (c:\ports.txt)
>
> Some things have changed from my last e-mail.
>
> I downloaded the source wireshark-1.1.2-SVN-26844.
> I built wireshark using the Visual Studio 2005 Command prompt.
> I put my plugin in place and it too builds fine and runs great on the development machine.
> I have no problems running my software and dissecting packets.
>
> But when I copy the helen.dll.manifest and the helen.dll to another machine I get 
> **"Couldn't load module", The specified module could not be found.**
>
> Any thoughts..?
>
> Thank you very much for your help.
>
> Brian
>
>  
>   
>
>
> wsgd wrote:
>
>     I think the answer is into your first mail :
>     http://www.wireshark.org/lists/wireshark-dev/200902/msg00013.html
>
>     To include the manifest inside the dll :
>
>     mt.exe -manifest <dll_name>.dll.manifest - outputresource:<dll_name>.dll;2
>
>
>     Also, into proto_reg_handoff_helen,
>      if you have  many ports,
>      you are calling many times :
>     - data_handle = find_dissector("data");     ---> useless
>     - helen_handle = create_dissector_handle(dissect_helen, proto_helen);   
>     ---> I do not think it works
>
>
>     Olivier
>
>     Brian Oleksa a écrit :
>       
>
>         Olivier (wsgd)
>
>         I fixed the problem in the code that you found. Thanks again for finding 
>         this.
>         I tested it on the development machine and it worked great.!!
>
>         I then took the created helen.dll file and dropped it on a deploy 
>         machine that is running the same version of wireshark that I developed 
>         against
>         only to find that it "Couldn't load module", The specified module could 
>         not be found.
>
>         Any suggestions or thoughts on this one..?
>
>         Thanks again for all your help.
>
>         Brian
>
>
>
>         wsgd wrote:
>           
>             
>
>             Hello,
>
>             Into proto_reg_handoff_helen,
>              you try to fopen("/root/ports", "r"),
>              which certainly fails on windows,
>              so you call exit(1).
>
>
>
>             Olivier
>
>             Brian Oleksa a écrit :
>               
>                 
>                   
>
>                 Wiresharkers
>
>                 I have followed these instructions: (I used both of these as one was 
>                 more clear than the other on certain tasks).
>                 http://www.codeproject.com/KB/IP/custom_dissector.aspx
>                 http://www.wireshark.org/docs/wsdg_html_chunked/ChSetupWin32.html
>
>                 I am using:
>
>                 MSVC_VARIANT=MSVC2008EE
>
>                 I then verify_tools, install libraries (nmake -f Makefile.nmake 
>                 setup), distclean and build wireshark with *NO *problems.
>
>                 I then test wireshark and it does indeed start up with *NO *problems.
>
>                 I then create my wireshark dissector code, make files etc.*
>                 (NOTE: This runs on Linux FC-9 with NO problems. If I take the 
>                 attached helen.zip file go to my
>                 linux box, do a make install and put the helen.so file in the plugin 
>                 directory everything works fine.)
>                 *
>
>
>                 I drop my code in place. C:\wireshark\plugins\helen
>                 The name of my wireshark dissector is called helen.
>
>                 From the C:\wireshark\plugins\helen directory I do the following:
>                 nmake -f Makefile.nmake distclean
>                 nmake -f Makefile.nmake all
>
>                 I have NO errors and it does indeed create a *helen.dll* file. (Which 
>                 I believe is what I want).
>
>                 I drop this helen.dll file in the following directory:
>                 C:\wireshark\wireshark-gtk2\plugins\1.1.4HELEN-DISSECTOR
>
>                 I start up wireshark (by invoking wireshark.exe) the splash screen 
>                 appears for a second than disappears. So it never start up.
>                 It does not provide me with a error message.
>
>                 I tried the following work around (click on link below) but had NO luck.
>                 http://www.wireshark.org/lists/wireshark-dev/200902/msg00013.html
>
>                 So at this point...I am stuck.
>
>                 Attached is all my code (helen.zip). Again, this same code works on my 
>                 fedora core 9 box.
>
>                 Any help is greatly appreciated.
>
>                 Thank you
>
>                 Brian Oleksa
>                 Software Developer
>                 Dark Corner Software
>
>
>
>
>
>
>
>
>
>
>
>                 ------------------------------------------------------------------------
>
>                 ___________________________________________________________________________
>                 Sent via:    Wireshark-dev mailing list <wireshark-dev@xxxxxxxxxxxxx> <mailto:wireshark-dev@xxxxxxxxxxxxx>
>                 Archives:    http://www.wireshark.org/lists/wireshark-dev
>                 Unsubscribe: https://wireshark.org/mailman/options/wireshark-dev
>                              mailto:wireshark-dev-request@xxxxxxxxxxxxx?subject=unsubscribe
>                     
>                       
>                         
>
>               
>                 
>                   
>
>         ___________________________________________________________________________
>         Sent via:    Wireshark-dev mailing list <wireshark-dev@xxxxxxxxxxxxx> <mailto:wireshark-dev@xxxxxxxxxxxxx>
>         Archives:    http://www.wireshark.org/lists/wireshark-dev
>         Unsubscribe: https://wireshark.org/mailman/options/wireshark-dev
>                      mailto:wireshark-dev-request@xxxxxxxxxxxxx?subject=unsubscribe
>
>
>           
>             
>
>       
>
>
> Votre correspondant a choisi Hotmail et profite d'un stockage 
> quasiment illimité. Créez un compte Hotmail gratuitement ! 
> <http://www.windowslive.fr/hotmail/default.asp>
> ------------------------------------------------------------------------
>
> ___________________________________________________________________________
> Sent via:    Wireshark-dev mailing list <wireshark-dev@xxxxxxxxxxxxx>
> Archives:    http://www.wireshark.org/lists/wireshark-dev
> Unsubscribe: https://wireshark.org/mailman/options/wireshark-dev
>              mailto:wireshark-dev-request@xxxxxxxxxxxxx?subject=unsubscribe