Wireshark-dev: Re: [Wireshark-dev] New WiMAX R6 plug-in
Date Index · Thread Index · Other Months · All Mailing Lists
Date Prev · Date Next · Thread Prev · Thread Next
From: Nitin Naveen <Nitin.Naveen@xxxxxxx>
Date: Tue, 24 Jul 2007 16:30:36 +0530

Hello All,

I am sharing the code for WiMAX R6/R4 plugin. Hope that it is useful to the community.

Regards
Nitin Naveen
Principal Engineer
HUGHES SYSTIQUE
D-8, Infocity-11
Sector-33, Gugaon
Haryana, India
tel: +91-124-3045400
fax: +91-124-4039301
nitin.naveen@xxxxxxx
www.hsc.com

               
From: "Martin Mathieson" <martin.r.mathieson@xxxxxxxxxxxxxx>
Date: Thu, 19 Jul 2007 10:29:46 +0100
Hi,

Please do send the code, preferably with one or more test captures (I
have examples for some of R6, but not all)!

Thanks,
Martin




Nitin Naveen/ENGG/GGN/HSC

07/19/2007 09:22 AM

To
wireshark-dev@xxxxxxxxxxxxx
cc
gerald@xxxxxxxxxxxxx
Subject
New WiMAX R6 plug-in




Hi,

I generated dummy packets for WiMAX protocol. Saved the capture to a dummy file wimax_ether.cap.
Then ran 'fuzz-test.sh"
./fuzz-test.sh -p 2000 -d /root/ /root/wimax_ether.cap

For all passes I got the following message
Pass 839:
    /root/wimax_ether.cap:  OK

Have I missed something or all is OK. If all is OK the I shall make clean and release the code.

Regards
Nitin

From: Jaap Keuter <jaap.keuter@xxxxxxxxx>
Date: Tue, 10 Jul 2007 19:32:01 +0200
Hi,
First thing to so it testdrive it using fuzztest. Have a collection of capture files ready which fuzztest will feed to your Wireshark+plugin. That way you may find bugs not found during code review.

Then make sure all support files are in as stated in README.plugin.
Then 'make clean' the plugin directory and gzip it, after which you can attach it to a mail to the developer mailing list. When time permits we'll go over it and consider it for inclusion.


In the mean time a Wiki page would be nice, and most importantly, a sample capture file.

Thanx,
Jaap


Nitin Naveen wrote:


Hi,

I am Nitin Naveen working at HUGHES SYSTIQUE. We have developed a plug-in to display
WiMAX R6 messages (between BTS and ASNGW). This plug-in is NOT for the AIR interface.
It is for WiMAX signalling messages carried over Ethernet/ IP/ UDP.

We have followed most of the guidelines as per README.developer.  It would be great if
it can be included with the normal Wireshark distribution.

Please let us know what are the various steps that we need to follow.

Regards
Nitin Naveen
Principal Engineer
HUGHES SYSTIQUE
D-8, Infocity-11
Sector-33, Gugaon
Haryana, India
tel: +91-124-3045400
fax: +91-124-4039301
nitin.naveen@xxxxxxx
www.hsc.com 



*****************************************************DISCLAIMER*****************************************************

This message and/or attachment(s) contained here are confidential, proprietary to HUGHES SYSTIQUE and its customers. 
Contents may be privileged or otherwise protected by law. The information is solely intended for the entity it is 
addressed to. If you are not the intended recipient of this message, it is strictly prohibited to read, forward, 
print, retain, copy or disseminate this message or any part of it. If you have received this e-mail in error, 
please notify the sender immediately and delete the message.

********************************************************************************************************************

Attachment: wimax_r6r4_plugin_HSC.tgz
Description: Binary data

Attachment: wimax_ether.cap
Description: Binary data