Hi,
You could update the information on http://wiki.wireshark.org/Asn2wrs
Brg
Anders
________________________________
From: wireshark-dev-bounces@xxxxxxxxxxxxx on behalf of Jacob Avraham
Sent: Tue 9/5/2006 5:33 PM
To: Developer support list for Wireshark
Subject: Re: [Wireshark-dev] A question about ASN.1 encoding in wireshark
Hi,
I was struggling with the same issue a couple of days ago, as it wasn't clear from reading
other dissectors what needs to be done.
So I wrote a very basic dissector that dissects UDP packets off a curtain port and are ASN1 encoded
with a couple of fields.
I think that such an example could be useful under the asn1 directory.
Let me know if you want me to post it and how to post it.
Jacob
________________________________
From: wireshark-dev-bounces@xxxxxxxxxxxxx [mailto:wireshark-dev-bounces@xxxxxxxxxxxxx] On Behalf Of Anders Broman (AL/EAB)
Sent: Tuesday, September 05, 2006 11:59 AM
To: Developer support list for Wireshark
Subject: Re: [Wireshark-dev] A question about ASN.1 encoding in wireshark
Hi,
You have to write a dissector for your protocol and have it register for the TCP port used in order to have the protocol dissected.
Brg
Anders
________________________________
From: wireshark-dev-bounces@xxxxxxxxxxxxx [mailto:wireshark-dev-bounces@xxxxxxxxxxxxx] On Behalf Of chris.guo@xxxxxxxxx
Sent: den 5 september 2006 05:38
To: wireshark-dev@xxxxxxxxxxxxx
Subject: Re: [Wireshark-dev] A question about ASN.1 encoding in wireshark
Hi,
I made a ASN1 based message on TCP, but could not get anything displayed after TCP in wireshark. by default it used ENTTEC after TCP.
________________________________
From: wireshark-dev-bounces@xxxxxxxxxxxxx [mailto:wireshark-dev-bounces@xxxxxxxxxxxxx] On Behalf Of ext Anders Broman (AL/EAB)
Sent: Wednesday, August 30, 2006 4:09 PM
To: Developer support list for Wireshark
Subject: Re: [Wireshark-dev] A question about ASN.1 encoding in wireshark
Hi,
Do you get anything displayed after TCP?
See http://wiki.wireshark.org/Asn2wrs on how to design an asn1 based dissector using asn2wrs.
Best regards
Anders
________________________________
From: wireshark-dev-bounces@xxxxxxxxxxxxx [mailto:wireshark-dev-bounces@xxxxxxxxxxxxx] On Behalf Of chris.guo@xxxxxxxxx
Sent: den 30 augusti 2006 04:03
To: wireshark-dev@xxxxxxxxxxxxx
Subject: [Wireshark-dev] A question about ASN.1 encoding in wireshark
Hi All,
I have a question about ASN.1 decoding in wirshark, hope can get someone's help.
I have my own defined ASN.1 messages, these messages are decoded with BER, the messages transfer based on TCP/IP, wireshark can capture the messages, and decode the message, but can not display the field name in the detailed information area.
I want to add my ASN.1 definitions in wireshark, and can decode/show the message correctly in the detailed information area in the wireshark, but I do not know how to proceed, it there any one can share the experiences or send me some useful materials?
Thank you very much,
Chris
<<winmail.dat>>
