Wireshark-bugs: [Wireshark-bugs] [Bug 7699] New: BACnet GetEnrollmentSummary-ACK does not decode
Date Index · Thread Index · Other Months · All Mailing Lists
Date Prev · Date Next · Thread Prev · Thread Next
From: bugzilla-daemon@xxxxxxxxxxxxx
Date: Wed, 5 Sep 2012 05:56:42 -0700 (PDT)
https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=7699

           Summary: BACnet GetEnrollmentSummary-ACK does not decode
                    correctly
           Product: Wireshark
           Version: 1.8.2
          Platform: x86
        OS/Version: Windows XP
            Status: NEW
          Severity: Normal
          Priority: Low
         Component: Wireshark
        AssignedTo: bugzilla-admin@xxxxxxxxxxxxx
        ReportedBy: nuabaranda@xxxxxx
                CC: jeff.morriss.ws@xxxxxxxxx, ljtconsulting@xxxxxxxxx,
                    nuabaranda@xxxxxx
        Depends on: 7556


Created attachment 9067
  --> https://bugs.wireshark.org/bugzilla/attachment.cgi?id=9067
Packetdump to verify

Build Information:
Version 1.8.2 (SVN Rev 44520 from /trunk-1.8)

Copyright 1998-2012 Gerald Combs <gerald@xxxxxxxxxxxxx> and contributors.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

Compiled (32-bit) with GTK+ 2.24.10, with Cairo 1.10.2, with Pango 1.30.0, with
GLib 2.32.2, with WinPcap (4_1_2), with libz 1.2.5, without POSIX capabilities,
with SMI 0.4.8, with c-ares 1.7.1, with Lua 5.1, without Python, with GnuTLS
2.12.18, with Gcrypt 1.4.6, with MIT Kerberos, with GeoIP, with PortAudio
V19-devel (built Aug 15 2012), with AirPcap.

Running on Windows XP Service Pack 3, build 2600, with WinPcap version 4.1.2
(packet.dll version 4.1.0.2001), based on libpcap version 1.0 branch 1_0_rel0b
(20091008), GnuTLS 2.12.18, Gcrypt 1.4.6, without AirPcap.

Built using Microsoft Visual C++ 10.0 build 40219
--
May be related to Bug #7556

In the attached packet dump the EnrollmentSummary-Ack shows an illegal node
"Object Identifier" below the object ID "(analog-output, 1)", which should be
the event type. The following nodes get miss-aligned.

-- 
Configure bugmail: https://bugs.wireshark.org/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are watching all bug changes.