Wireshark · Wireshark-bugs: [Wireshark-bugs] [Bug 3367] rsvp-te recovery label object print generic field data instead of c-type

[bugzilla-daemon@xxxxxxxxxxxxx]

https://bugs.wireshark.org/bugzilla/show_bug.cgi?id=3367


Balint Reczey <balint.reczey@xxxxxxxxxxxx> changed:

           What    |Removed                     |Added
----------------------------------------------------------------------------
                 CC|                            |balint.reczey@xxxxxxxxxxxx




--- Comment #3 from Balint Reczey <balint.reczey@xxxxxxxxxxxx>  2009-04-30 05:52:56 PDT ---
Seems to be fixed in TShark 1.1.4 (SVN Rev 28181).

tshark -V -r rsvp-te.cap 
.
...

Resource ReserVation Protocol (RSVP): PATH Message. SESSION: IPv4-LSP,
Destination 20.0.0.15, Tunnel ID 1, Ext ID 1400000a. SENDER TEMPLATE: IPv4-LSP,
Tunnel Source: 20.0.0.10, LSP ID: 1. 
    RSVP Header. PATH Message. 
        RSVP Version: 1
        Flags: 00
        Message Type: PATH Message.  (1)
        Message Checksum: 0x63f2 [correct]
        Sending TTL: 255
        Message length: 208
    SESSION: IPv4-LSP, Destination 20.0.0.15, Tunnel ID 1, Ext ID 1400000a. 
        Length: 16
        Object class: SESSION object (1)
        C-type: 7 - IPv4 LSP
        Destination address: 20.0.0.15 (20.0.0.15)
        Tunnel ID: 1
        Extended Tunnel ID: 335544330 (20.0.0.10)
    HOP: IPv4, 11.0.0.26
        Length: 12
        Object class: HOP object (3)
        C-type: 1 - IPv4
        Neighbor address: 11.0.0.26
        Logical interface: 38207529
    TIME VALUES: 30000 ms
        Length: 8
        Object class: TIME VALUES object (5)
        C-type: 1
        Refresh interval: 30000 ms (30 seconds)
    LABEL REQUEST: Basic: L3PID: IP (0x0800)
        Length: 8
        Object class: LABEL REQUEST object (19)
        C-type: 1
        L3PID: IP (0x0800)
    SESSION ATTRIBUTE: SetupPrio 3, HoldPrio 4,  [LSP \000]
        Length: 16
        Object class: SESSION ATTRIBUTE object (207)
        C-type: 7 - IPv4 LSP (No Resource Affinities)
        Setup priority: 3
        Hold priority: 4
        Flags: 0x00
            .... ...0 = Local protection not desired
            .... ..0. = Label recording not desired
            .... .0.. = SE style not desired
            .... 0... = Bandwidth protection not desired
            ...0 .... = Node protection not desired
        Name length: 5
        Name: LSP \000
    ADMIN-STATUS: Reflect   
        Length: 8
        Object class: ADMIN-STATUS object (196)
        C-type: 1
        Admin Status: 0x80000000
            1... .... .... .... .... .... .... .... = R: Reflect
            .... .... .... .... .... .... .... .0.. = T: 
            .... .... .... .... .... .... .... ..0. = A: 
            .... .... .... .... .... .... .... ...0 = D: 
    SENDER TEMPLATE: IPv4-LSP, Tunnel Source: 20.0.0.10, LSP ID: 1. 
        Length: 12
        Object class: SENDER TEMPLATE object (11)
        C-type: 7 - IPv4 LSP
        Sender IPv4 address: 20.0.0.10 (20.0.0.10)
        Sender LSP ID: 1
    SENDER TSPEC: IntServ: Token Bucket, 62500 bytes/sec. 
        Length: 36
        Object class: SENDER TSPEC object (12)
        C-type: 2 - Integrated Services
        Message format version: 0
        Data length: 7 words, not including header
        Service header: 1 - Traffic specification
        Length of service 1 data: 6 words, not including header
        Token Bucket TSpec: Rate=62500 Burst=1000 Peak=125000 m=20 M=1600
            Parameter 127 - Token bucket
            Parameter 127 flags: 0x00
            Parameter 127 data length: 5 words, not including header
            Token bucket rate: 62500
            Token bucket size: 1000
            Peak data rate: 125000
            Minimum policed unit [m]: 20
            Maximum packet size [M]: 1600
    ADSPEC
        Length: 48
        Object class: ADSPEC object (13)
        C-type: 2
        Message format version: 0
        Data length: 10 words, not including header
        Default General Parameters
            Service header 1 - Default General Parameters
            Break bit not set
            Data length: 8 words, not including header
            IS Hop Count - 1 (type 4, length 1)
            Path b/w estimate - 0 (type 6, length 1)
            Minimum path latency - 0 (type 8, length 1)
            Composed MTU - 1600 (type 10, length 1)
        Controlled Load
            Service header 5 - Controlled Load
            Break bit not set
            Data length: 0 words, not including header
    RECORD ROUTE: IPv4 11.0.0.26
        Length: 12
        Object class: RECORD ROUTE object (21)
        C-type: 1
        IPv4 Subobject - 11.0.0.26
            Type: 1 (IPv4)
            Length: 8
            IPv4 hop: 11.0.0.26
            Prefix length: 32
            Flags: 0x00
                .... ...0 = Local Protection Not Available
                .... ..0. = Local Protection Not In Use
                .... .0.. = Bandwidth Protection Not Available
                .... 0... = Node Protection Not Available
                ...0 .... = Address Doesn't Specify a Node-id Address
    SUGGESTED LABEL: 16
        Length: 8
        Object class: SUGGESTED-LABEL object (129)
        C-type: 1 (Packet Label)
        Label: 16
    UPSTREAM LABEL: 16
        Length: 8
        Object class: UPSTREAM-LABEL object (35)
        C-type: 1 (Packet Label)
        Label: 16
    RECOVERY LABEL: 16
        Length: 8
        Object class: RECOVERY-LABEL object (34)
        C-type: 1 (Packet Label)
        Label: 16

Could you check it with one of the latest automatic builds?:
http://www.wireshark.org/download/automated/


-- 
Configure bugmail: https://bugs.wireshark.org/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.