Ethereal-users: Re: [Ethereal-users] How to use Tethereal to decode SIP/SDP infomation

Note: This archive is from the project's previous web site, ethereal.com. This list is no longer active.

Date Index Thread Index Other Months All Mailing Lists
Date Prev Date Next Thread Prev Thread Next
From: phu@xxxxxxxxxxxx
Date: Fri, 25 Feb 2005 23:55:52 -0500 (EST)
I'm desiring the following result from Tethreal:

--------------from:
http://www.voip-info.org/tiki-index.php?page=Asterisk%20phone%20grandstream%20budgetone
 ------------

Here is a partial tethereal output:

Frame 2 (453 bytes on wire, 453 bytes captured)
Ethernet II, Src: 00:0c:6e:01:db:01, Dst: 00:0b:82:00:a8:f1
Internet Protocol, Src Addr: 192.168.233.66, Dst Addr: 192.168.233.67
User Datagram Protocol, Src Port: 5060 (5060), Dst Port: 5060 (5060)
Session Initiation Protocol
   Status-Line: SIP/2.0 484 Address Incomplete
       Status-Code: 484
   Message Header
       Via: SIP/2.0/UDP 192.168.233.67;branch=z9hG4bK0000000000000000
       From: "Holger Schurig"
<sip:grandstream1@192.168.233.66>;tag=0000000000000000
           SIP from address: "Holger Schurig"
<sip:grandstream1@192.168.233.66>
           SIP tag: 0000000000000000
       To: <sip:2@192.168.233.66>;tag=as32424689
           SIP to address: <sip:2@192.168.233.66>
           SIP tag: as32424689
       Call-ID: 0000000000000000@192.168.233.67
       CSeq: 46598 INVITE
       User-Agent: Asterisk PBX
       Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER
       Contact: <sip:2@192.168.233.66:0>
       Content-Length: 0

Frame 3 (512 bytes on wire, 512 bytes captured)
Ethernet II, Src: 00:0b:82:00:a8:f1, Dst: 00:0c:6e:01:db:01
Internet Protocol, Src Addr: 192.168.233.67, Dst Addr: 192.168.233.66
User Datagram Protocol, Src Port: 5060 (5060), Dst Port: 0 (0)

--------------------------

Could you help me? Thank you very much!!!

Paul

> Hi, kind guys:
>
> I need to trace SIP/SDP infomation using Tethereal on Linux remote
> terminal. The following command line can trace UDP infomation:
>
>  tethereal -V host 192.168.221.56 && port 5060 udp
>
> But it just shows UDP layer info. How can I use Tethereal command line
> to trace SIP/SDP layer information?
>
> Kindly looking forward to your helps!!!!!!!!!!!
>
> Paul
>
>
>
> _______________________________________________
> Ethereal-users mailing list
> Ethereal-users@xxxxxxxxxxxx
> http://www.ethereal.com/mailman/listinfo/ethereal-users