Ethereal-users: [Ethereal-users] how to setup capture filter for LMP (ver9 udp based)

Note: This archive is from the project's previous web site, ethereal.com. This list is no longer active.

Date Index Thread Index Other Months All Mailing Lists
Date Prev Date Next Thread Prev Thread Next
From: mgsoulak <Mike.Soulakis@xxxxxxxxxxx>
Date: Fri, 17 Dec 2004 08:45:41 -0600
Hi,

I  am running ethereal-0.10.8 for Windows and would like to dissectors/expand UDP based LMP packets.

I set the UDP port number in our LMP stack to 49998 (as defined as the default in dissector-lmp.c) :
"...
     68 #define IP_PROTO_LMP 140
     69 #define UDP_PORT_LMP_DEFAULT 49998
     70 static int lmp_udp_port = UDP_PORT_LMP_DEFAULT;
     71 static int lmp_udp_port_config = UDP_PORT_LMP_DEFAULT;
     72
..."

but when I start capturing
all it shows is raw UDP packets with the port number.

Do I need to specify anything else?

Here is what I put in the packet filter with no luck

(udp port 49998)

any help appreciated, 

-- 
 Michael G. Soulakis
 Alcatel USA
Plano, TX (972) 477-6975
  
begin:vcard 
n:Soulakis;Mike
x-mozilla-html:FALSE
org:OND;ASON/GMPLS Control Plane
adr:;;;;;;
version:2.1
email;internet:Mike.Soulakis@xxxxxxxxxxx
title:Principal Engineer
x-mozilla-cpt:;-18120
fn:Mike Soulakis
end:vcard