Ethereal-users: Re: [Ethereal-dev] Re: [Ethereal-users] RTP Analysis enhancementrequest

Note: This archive is from the project's previous web site, ethereal.com. This list is no longer active.

Date Index Thread Index Other Months All Mailing Lists
Date Prev Date Next Thread Prev Thread Next
From: "Martin Mathieson" <martin.mathieson@xxxxxxxxxxxx>
Date: Thu, 15 Jul 2004 09:19:31 +0100
At least in the case of SDP, there is usually an attribute associated with
the payload type, e.g. for PCMU you might see

a=rtpmap:0 PCMU/8000

It would be good to pass this timestamp frequency, where available, to
rtp_add_address(), where it could be stored in the conversation/packet-info
and used by RTP Analysis.

As an aside, it would also be good, in the case of dynamic payload numbers,
to pass the "PCMU" information part so that its real payload type could be
known and used.



----- Original Message -----
From: "Martin Regner" <martin.regner@xxxxxxxxx>
To: "Ethereal development" <ethereal-dev@xxxxxxxxxxxx>; "Ethereal user
support" <ethereal-users@xxxxxxxxxxxx>
Sent: 15 July 2004 08:51
Subject: Re: [Ethereal-dev] Re: [Ethereal-users] RTP Analysis
enhancementrequest


> Lars Ruoff wrote:
> > Ok, i will do it using the lookup table if you provide me a table
payload
> > type <-> timestamp frequency.
>
> For the fixed payload types you can find a table here:
> http://www.iana.org/assignments/rtp-parameters
>
> But for dynamic payload types you probably have to use some configuration
stuff.
>
>
> _______________________________________________
> Ethereal-users mailing list
> Ethereal-users@xxxxxxxxxxxx
> http://www.ethereal.com/mailman/listinfo/ethereal-users