Ethereal-users: RE: [Ethereal-users] Question about MMSE decoding

Note: This archive is from the project's previous web site, ethereal.com. This list is no longer active.

Date Index Thread Index Other Months All Mailing Lists
Date Prev Date Next Thread Prev Thread Next
From: Biot Olivier <Olivier.Biot@xxxxxxxxxxx>
Date: Fri, 25 Jun 2004 15:00:20 +0200
Title: Message
That's really odd. My version of Ethereal (0.10.4) shows both packets 24 and 26 with the "mmse and tcp" display filter, and shows the 3 desired packets with "(mmse and tcp) or tcp.reassembled_in == 24 or tcp.reassembled_in == 26" as display filter.
 
Regards,
 
Olivier
-----Original Message-----
From: Santos Edson-WES051

Oliver,
 
Thanks for your prompt answer.
 
I did what you mentioned but did not work. In fact when I applied the 1st display filter I was able to see only frame #26.
 
Regards,
 
Edson
 
 
Hello Edson,

This is currently not possible "automatically" but you can do it this way:
1. Apply the following display filter:
mmse and tcp
2. Note all packets that match: 24, 26
3. Now create the following display filter:
(mmse and tcp) or tcp.reassembled_in == 24 or tcp.reassembled_in ==
26
4. Prontinho :)

Should you have an MMSE-over-WSP-over-UDP capture, then you replace "tcp"
with "udp" in the previous explanation.

Hope this helps!

Regards,

Olivier

-----Original Message-----
From: Santos Edson-WES051


I'm using Ethereal to decode some MMS messages and I'm able to decode the
MMSE accordingly.

Refer to the file attached, frame #22 is a HTTP Post (sending the MMS
Message) and frame #24 is the MMS message itself. Is there any way to decode
frame #24 as MMSE considering the Content-Type/Content-Legth headers from
frame #22?

Please, could some help me on that?

My Best Regards,

Edson
+55 19 3847-6187