Ethereal-users: RE: [Ethereal-users] Convenient way to measure bits/sec for singl e port?
If you have a capture at hand, open it in Ethereal. Possibly you'll have to
filter on the UDP port you're interested in (E.g., udp.port == 1234), if
your capture contains other traffic too. Then go to Analyze -> Summary, and
you'll get a summary of the overall traffic and of the filtered traffic (if
you filtered the capture).
You can also generate graphics with the Analyze -> Statistics -> IO ->
IO-stat where you can display the frames per tick, bytes per tick or even
more advanced stuff, and specify the tick interval (from 1 millisecond to 10
seconds).
Regards,
Olivier
| -----Original Message-----
| From: McMahon, Chris
|
| Hello...
| I'm hoping there's an obvious way to do this:
| I have a client receiving a large amount of UDP traffic
| on a single
| port. I can run Ethereal on the client. Is there a
| convenient way to report
| how much traffic hits that port in particular time
| increments, seconds being
| the most convenient?
| Thanks, I've been surfing the documentation, and this
| doesn't *look* like an RTFM question...
| -Chris
