Ethereal-users: Re: Re: [Ethereal-users] Radius attribute "Event-Timestamp" is not decoded

Note: This archive is from the project's previous web site, ethereal.com. This list is no longer active.

Date Index Thread Index Other Months All Mailing Lists
Date Prev Date Next Thread Prev Thread Next
From: carlos.garciagarcia@xxxxxxxxxxxxxxxxxxx
Date: Tue, 11 Feb 2003 12:00:45 +0100

Guy, Martin,

You are right.  The description of my timezone is "Hora estándar romance"
("Standard Roman Time") and includes an accented vowel. I have hacked the
registry entry of this timezone to eliminate the accent, and now it displays OK
:-)

Thanks for your help and fast response.

Regards,

Carlos




Por favor, responda a martin.regner@xxxxxxxxx

Destinatarios: Carlos Garcia Garcia/TDE@TDE, Guy Harris <guy@xxxxxxxxxx>
CC:     ethereal-users@xxxxxxxxxxxx
Asunto: Re: Re: [Ethereal-users] Radius attribute "Event-Timestamp" is not
        decoded




Hi,

I guess that the problem is that the timezone description text in your case
includes some characters with accents or similar, as Guy has already written.

The capture you sent works for me without problems,
no blank lines.
Timezone is shown as "W. Europe Standard Time" on my Win2K PC.

     t:Acct Status Type(40) l:6, Value:Tunnel Link Stop(13)
        t:Acct Session Id(44) l:10, Value:"00000016"
        t:Event Timestamp(55) l:6, Value:1039677246 (Thu Dec 12 08:14:06 2002 W.
Europe Standard Time)
        t:NAS IP Address(4) l:6, Value:111.111.111.111
        t:Vendor Specific(26) l:45, Vendor:Shasta(3199)

If you use "File/Print...,Print to File (x), Print detail(x)"
you will probably see the Event Timestamp line and then you can check
what timezone it says and see if it contains any characters
with accents or similar (e.g. "Européene" or similar).

Regards,
 Martin


>
> Från: carlos.garciagarcia@xxxxxxxxxxxxxxxxxxx
> Datum: 2003/02/10 Mon PM 08:10:41 CET
> Till: Guy Harris <guy@xxxxxxxxxx>
> Kopia: ethereal-users@xxxxxxxxxxxx
> Ämne: Re: [Ethereal-users] Radius attribute "Event-Timestamp" is not
>     decoded
>
>
>
>
> Thanks, Guy.
>
> It displays a blank line...
>
> My "standard" system is a NT 4.0. As you said you could see the attribute
> decoded in W2K, I have tried in my laptop with W2K and version 0.9.9, and the
> result is the same. Only a blank line is displayed...
>
> Regards,
>
> Carlos
>
> >On Mon, Feb 10, 2003 at 09:57:30AM +0100,
> carlos.garciagarcia@xxxxxxxxxxxxxxxxxxx wrote:
> >> I have a problem with the latest version of Ethereal and the Radius
attribute
> >> "Event-Timestamp" (decimal code 55)
> >>
> >> Ethereal 0.9.2, on Linux: it decodes the attribute OK
> >> Ethereal 0.9.9, on Windows NT: the attribute is not decoded, nor is
> considered
> >> an unknown attribute. It is simply not displayed, like a password.
> >
> >Well, with the 0.9.9 binary I installed, on NT 5.0 ("Windows 2000"), it
> >displays a line for the event time stamp, with a value of 1039677246
> >(Wed Dec 11 23:14:06 2002 Pacific Standard Time).
> >
> >What does Ethereal display on your system between the "Acct Session
> >ID(44)" and "NAS IP Address(4)" attributes?
>
>
>
> _______________________________________________
> Ethereal-users mailing list
> Ethereal-users@xxxxxxxxxxxx
> http://www.ethereal.com/mailman/listinfo/ethereal-users
>