Ethereal-users: Re: [Ethereal-users] [Q] Filters not working ?!?

Note: This archive is from the project's previous web site, ethereal.com. This list is no longer active.

Date Index Thread Index Other Months All Mailing Lists
Date Prev Date Next Thread Prev Thread Next
From: stefmit@xxxxxxxxxxxxx
Date: Thu, 25 Jan 2001 17:18:06 -0600
	THANKS for such a quick response!!

	I have actually put the "sniffer" machine (the one running 
ethereal) on a hub where I had the "a" machine plugged in also - 
and only then the hub plugged into a switch port (and no - that's all 
I have in the path - so I am not breaking the 3-4-5 rule anywhere on 
the path to either "b" or "c") ... 

	The more so (apologies for having failed to clarify that in my 
initial post), with the above setup, I can see traffic when the filter is:

host a and b

as well as (obviously, now) when it is:

host a and c

but no traffic a<->b (!!), but only a<->c when filter is:

host a and (b or c) ... which may me doubt the syntax ?!?

Quite puzzling ... I know ... 

	Thanks again for help ... any other ideas?,
	Stef

On 25 Jan 2001, at 14:26, Guy Harris wrote:

<snip>
> > yes - what is the correct syntax?
> 
>  host a and (b or c)
> 
> _______________________________________________
> Ethereal-users mailing list
> Ethereal-users@xxxxxxxxxxxx
> http://www.ethereal.com/mailman/listinfo/ethereal-users