Ethereal-users: Re: [ethereal-users] can't open an interface without IPv4address assigned

Note: This archive is from the project's previous web site, ethereal.com. This list is no longer active.

Date Index Thread Index Other Months All Mailing Lists
Date Prev Date Next Thread Prev Thread Next
From: Carl Klatsky <cklatsky@xxxxxxx>
Date: Tue, 26 Sep 2000 12:10:06 -0400
Hi all,

I'm using the ATM enabled Ethereal.  It works well.  If you decide to
set it up, definitely go through the mail archives and review the parts
about using the right libpcap that defines the ATM interfaces.  Guy was
able to walk me through that part and it's documented in the e-mail
exchanges.

Carl

"Eichert, Diana" wrote:
> 
> Hi
> 
>         My vote would be for the first time an interface is used.  In the
> meantime I've put a private IP number on that interface so I could watch the
> traffic.
> 
>         Question, do you have a suggestion for a hardware platform to
> analyze gigE traffic.  i.e. pentium III speed, memory, and which gigE card.
> 
>         Also, anyone out there using the ATM enabled ethereal I read about
> awhile back?
> 
> once again,  thanks for a great tool.
> 
> diana

-- 
|Carl Klatsky	    |Ph:     732.530.4471     |
|3NO Systems, Inc.  |Fax:    732.530.2110     | 
|http://www.3no.com |E-mail: cklatsky@xxxxxxx |