For the ISO 9542 packet, shown below, "Titel" should be "Title".
Also, "Routeing" should be "Routing".
I could fix this myself, but what is the protocol for forwarding
changes back to the source archive?
Signed
Mr. ISIS wanna-be (A.K.A. greg)
Frame 2 (41 on wire, 41 captured)
Arrival Time: Jan 23, 2002 15:57:15.0726
Time delta from previous packet: 0.364108 seconds
Time relative to first packet: 0.364108 seconds
Frame Number: 2
Packet Length: 41 bytes
Capture Length: 41 bytes
IEEE 802.3
Destination: 09:00:2b:00:00:04 (09:00:2b:00:00:04)
Source: 08:00:20:f4:ce:74 (Sun_f4:ce:74)
Length: 27
Logical-Link Control
DSAP: ISO Network Layer (0xfe)
IG Bit: Individual
SSAP: ISO Network Layer (0xfe)
CR Bit: Command
Control field: U, func = UI (0x03)
000. 00.. = Unnumbered Information
.... ..11 = Unnumbered frame
ISO 9542 ESIS Routeing Information Exchange Protocol
Network Layer Protocol Identifier: ESIS (0x82)
PDU Length : 24
Version (==1) : 1
Reserved(==0) : 0
PDU Type : IS HELLO (R:000)
Holding Time : 30 seconds
Checksum : 0x3751 ( Is wrong )
### Network Entity Titel Section ###
NETL: 10 Octets
NET: 47222200.000000000100
### Option Section ###
ESCT : 600 seconds
--
__@ Greg Franks <| _~@ __O
_`\<,_ Ottawa, Ontario, Canada |O\ -^\<;^\<,
(*)/ (*) (*)--(*)%---/(*)
"Where do you want to go today?" Outside.
