Wireshark-users: Re: [Wireshark-users] MPEG2TS over UPD not decoded
Date Index · Thread Index · Other Months · All Mailing Lists
Date Prev · Date Next · Thread Prev · Thread Next
From: Jaap Keuter <jaap.keuter@xxxxxxxxx>
Date: Tue, 04 Dec 2007 08:15:28 +0100
Hi,
Committed revision 23743 adding UDP transport for MPEG2TS, both heuristic and "Decode as". 

Thanx,
Jaap


Jake Peavy wrote:
On 12/3/07, *maurizio simoni* <mau2000.sim@xxxxxxxxx <mailto:mau2000.sim@xxxxxxxxx>> wrote: 

    MPEG2TS can be also detected in a heuristic way if transported over UDP.
    These are some rules that can be applied:
    1) UDP payload length must be a multiple of 188 (usually a UDP
    packet contains an integer number of TS packets, where each TS
    packet is 188 bytes).
    2) The first octet of each TS packet inside the UDP payload must be
    equal to 0x47 (sync byte)
    3) At least 2 or 3 consecutives UDP packets satisfying rules 1) and
    2) onthe same IP address and UDP port.
    <http://www.wireshark.org/mailman/listinfo/wireshark-users>
I see heuristic detection of MPEGTS as a Step 2 of this process. In the meantime I have no problem manually instructing Wireshark to Decode As... but the question remains - how to have Wireshark dissect MPEGTS payloads in UDP encapsulated streams? Nobody has answered this question. MPEGTS is not in the list of available dissectors though it works "out of the box" on RTP encapsulated streams. 

--
-jp