Display Filter Reference: DVB-S2 Baseband Frame
Protocol field name: dvb-s2_bb
Versions: 1.10.0 to 3.4.5
Back to Display Filter Reference
| Field name | Description | Type | Versions |
|---|---|---|---|
| dvb-s2_bb.bad_checksum | Bad checksum | Label | 2.4.0 to 3.4.5 |
| dvb-s2_bb.crc | Checksum | Unsigned integer, 1 byte | 1.10.0 to 3.4.5 |
| dvb-s2_bb.crc.status | Checksum Status | Unsigned integer, 1 byte | 2.4.0 to 3.4.5 |
| dvb-s2_bb.df | BBFrame user data | Sequence of bytes | 3.4.0 to 3.4.5 |
| dvb-s2_bb.dfl | DFL | Unsigned integer, 2 bytes | 1.10.0 to 3.4.5 |
| dvb-s2_bb.eip_crc32 | EIP CRC32 | Unsigned integer, 4 bytes | 3.4.0 to 3.4.5 |
| dvb-s2_bb.header_ambiguous | Mode Adaptation header ambiguous | Label | 2.4.0 to 3.4.5 |
| dvb-s2_bb.issy_invalid | ISSY is active, which is not allowed for GSE packets | Label | 2.4.0 to 3.4.5 |
| dvb-s2_bb.matype1 | MATYPE1 | Unsigned integer, 1 byte | 1.10.0 to 3.4.5 |
| dvb-s2_bb.matype1.acm | Coding and Modulation | Boolean | 1.10.0 to 3.4.5 |
| dvb-s2_bb.matype1.gs | Stream Input | Unsigned integer, 1 byte | 1.10.0 to 2.2.17 |
| dvb-s2_bb.matype1.issyi | ISSYI | Boolean | 1.10.0 to 3.4.5 |
| dvb-s2_bb.matype1.mis | Input Stream | Boolean | 1.10.0 to 3.4.5 |
| dvb-s2_bb.matype1.npd | NPD | Boolean | 1.10.0 to 3.4.5 |
| dvb-s2_bb.matype1.ro | RO | Unsigned integer, 1 byte | 1.10.0 to 3.4.5 |
| dvb-s2_bb.matype1.tsgs | TS/GS Stream Input | Unsigned integer, 1 byte | 2.4.0 to 3.4.5 |
| dvb-s2_bb.matype2 | MATYPE2 | Unsigned integer, 1 byte | 1.10.0 to 3.4.5 |
| dvb-s2_bb.npd_invalid | NPD is active, which is not allowed for GSE packets | Label | 2.4.0 to 3.4.5 |
| dvb-s2_bb.packetized | Packetized Generic Stream Data | Sequence of bytes | 2.4.0 to 3.4.5 |
| dvb-s2_bb.reserved | Reserved Stream Type Data | Sequence of bytes | 2.4.0 to 3.4.5 |
| dvb-s2_bb.reserved_frame_format | Reserved frame format in TS/GS is not defined | Label | 2.4.0 to 3.4.5 |
| dvb-s2_bb.sync | SYNC | Unsigned integer, 1 byte | 1.10.0 to 3.4.5 |
| dvb-s2_bb.syncd | SYNCD | Unsigned integer, 2 bytes | 1.10.0 to 3.4.5 |
| dvb-s2_bb.transport | Transport Stream Data | Sequence of bytes | 2.4.0 to 3.4.5 |
| dvb-s2_bb.upl | UPL | Unsigned integer, 2 bytes | 1.10.0 to 3.4.5 |
| dvb-s2_bb.upl_invalid | User Packet Length non-zero, which is not allowed for GSE packets | Label | 2.4.0 to 3.4.5 |
Go Beyond with Riverbed Technology
I have a lot of traffic...
ANSWER: SteelCentral™ AppResponse 11
- • Full stack analysis – from packets to pages
- • Rich performance metrics & pre-defined insights for fast problem identification/resolution
- • Modular, flexible solution for deeply-analyzing network & application performance